Custom folding trailer for 14-15ft inflatable boats (specifically inflatable keel boats, not compatible with RIB). Built on HAUL-MASTER 1720 lb. Capacity, 4 ft. x 8 ft. Heavy Duty Folding Trailer. Specifically designed to be able to be folded up for storage (in a small shed or corner of a garage) when storage space is limited. The most interesting feature of this trailer is that you can tilt the rear of it downward so your inflatable boat can be easily loaded and unloaded on the ground without putting it into the water. Just deploy your boat's stern wheels, lift the bow, and pull it onto the back roller then connect the winch and pull the boat right up into position on the trailer. Once in place, there is a flip up stern support brace that gives good stability to the stern to support the weight of the motor. The tilting feature also helps with launching and retrieving the boat in the water.
The bunks are made from pressure treated wood coated with automotive undercoating, covered in marine carpet, and attached with stainless steel hardware. The entire trailer has been coated with truck bed coating for durability. The lights are marine grade, wiring connections soldered and sealed with marine heat shrink. Wheel bearings protected by Bearing Buddies. Tires are almost new (>95% tread). The extended tongue can be folded back to a length of 12 feet. Trailer was only used two times in freshwater before my boat started leaking and ultimately became non-repairable.